- Industrie: Education; Oil & gas
- Number of terms: 4495
- Number of blossaries: 0
- Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
pertaining to packers and other tools left in the wellbore to be broken up later by the drill bit. Drillable equipment is made of cast iron, aluminum, plastic, or other soft, brittle material.
Industry:Oil & gas
a formation-stimulation process first used about 100 years ago in Pennsylvania. Nitroglycerine is placed in a well and exploded to fracture.
Industry:Oil & gas
to release pipe that is stuck in the hole by running washover pipe. The washover pipe must have an outside diameter small enough to fit into the borehole but an inside diameter large enough to fit over the outside diameter of the stuck pipe. A rotary shoe, which cuts away the formation, mud, or whatever is sticking the pipe, is made up on the bottom joint of the washover pipe, and the assembly is lowered into the hole. Rotation of the assembly frees the stuck pipe. Several washovers may have to be made if the stuck portion is very long.
Industry:Oil & gas
the smooth, uninterrupted circulation of drilling fluid down the drill stem, out the bit, up the annular space between the pipe and the hole, and back to the surface.
Industry:Oil & gas
an accessory used in fishing operations to go over the outside of tubing or drill pipe stuck in the hole because of cuttings, mud, and so forth, that have collected in the annulus. The washover pipe cleans the annular space and permits recovery of the pipe. It is sometimes called washpipe.
Industry:Oil & gas
1. a passageway through jet bits that causes the drilling fluid to be ejected from the bit at high velocity.
Industry:Oil & gas
the assembly of tools run into the hole during fishing to perform a washover. A typical washover string consists of a washover back-off connector, several joints of washover pipe, and a rotary shoe.
Industry:Oil & gas
the cutting or boring element used in drilling oil and gas wells. Most bits used in rotary drilling are roller-cone bits. The bit consists of the cutting elements and the circulating element. The circulating element permits the passage of drilling fluid and utilizes the hydraulic force of the fluid stream to improve drilling rates.
Industry:Oil & gas
