- Industrie: Government
- Number of terms: 22108
- Number of blossaries: 0
- Company Profile:
A unit of apparent power, equal to 1,000 volt-amperes; the mathematical product of the volts and amperes in an electrical circuit.
Industry:Energy
A unit for the quantity of electricity transported in 1 second by a current of 1 ampere.
Industry:Energy
A unit for measuring the extent that the outdoor daily average temperature (the mean of the maximum and minimum daily dry-bulb temperatures) falls below (in the case of heating, see Heating Degree Day), or falls above (in the case of cooling, see Cooling Degree Day) an assumed base temperature, normally taken as 65 degrees Fahrenheit, unless otherwise stated. One degree day is counted for each degree below (for heating) or above (in the case of cooling) the base, for each calendar day on which the temperature goes below or above the base.
Industry:Energy
A type of window having two layers (panes or glazing) of glass separated by an air space. Each layer of glass and surrounding air space reradiates and traps some of the heat that passes through thereby increasing the windows resistance to heat loss (R-value).
Industry:Energy
A type of window glazing films used to block the infrared (heat) portion of the solar spectrum but admit a higher portion of visible light.
Industry:Energy
A type of window glass that contains special tints that cause the window to absorb as much as 45% of incoming solar energy, to reduce heat gain in an interior space. Part of the absorbed heat will continue to be passed through the window by conduction and reradiation.
Industry:Energy
A type of wind turbine in which the axis of rotation is perpendicular to the wind stream and the ground.
Industry:Energy
A type of water heater that has no storage tank thus eliminating storage tank stand-by losses. Cold water travels through a pipe into the unit, and either a gas burner or an electric element heats the water only when needed.
Industry:Energy
A type of water heater in which heated water is stored within the tank. Hot water is released from the top of the tank when a hot water faucet is turned. This water is replaced with cold water that flows into the tank and down to just above the bottom plate under which are the burners.
Industry:Energy
